Blog

What is Subaru X-MODE?

Available only on Subaru vehicles, X-MODE complements Subaru symmetrical full-time AWD to allow drivers to take the road less traveled, get muddier, and have more daring adventures. The system provides the advanced, all-road capability and rugged performance, and elevates driving confidence, especially on uneven surfaces or challenging inclines. If you are looking for a Subaru vehicle with off-road capabilities to get you through those tough terrains, then a Subaru with X-MODE can be very beneficial. At our Pfaff Subaru dealership in Guelph, ON, our customers can find their next off-roading Subaru in our inventory! However, if you have heard about Subaru X-MODE, but you are looking for more information about it, then you have come to the right place. Read on to learn more about Subaru X-MODE. 

Click here to begin browsing through our inventory at Pfaff Subaru. 

How does Subaru X-MODE work? 

With the push of a button, X-MODE controls the engine output, transmission, AWD torque split, and braking system to help tackle the trickiest of conditions and bring even more rugged capability into sharp focus. This driver-engaged feature will consume more fuel so its use is only recommended when the conditions warrant significantly more grip, stability, and control. With the system activated, the vehicle is better able to capitalize on the traction available and provides surefootedness over and above what is afforded by Subaru symmetrical full-time AWD.

When would I need to activate Subaru X-MODE? 

There are a few different scenarios on which you can activate Subaru X-MODE. Some of these scenarios include: 

When climbing a hill:

When traveling up an incline with low traction conditions such as over very uneven rugged terrain, X-MODE uses lower gear ratios to generate extra power at the wheels that have the most grip. The transmission control unit (TCU) also provides 25% more AWD clutch pressure to control rotational differences between the front and rear wheels. This provides added stability, surefootedness, and the extra forward momentum required to climb more easily.

On a slippery surface:

With X-MODE engaged, the traction control system becomes more sensitive, significantly reducing the time needed for a given wheel to recapture a loss of traction and regain forward momentum. This feature helps to improve control and stability in all conditions, but in particular when conditions are at their worst. In this case, more power is diverted away from the wheels that are slipping and towards those that are better able to capitalize on the traction available. Conversely, if the situation warrants, X-MODE will deactivate the transmission’s lock-up clutch to better direct power to slipping wheels. This proves valuable if one wheel suddenly loses traction when driving at speed and the goal is maintaining stability and staying on course.

On a steep decline:

Hill Descent Control (HDC) maintains a constant speed when traveling down steep declines at less than 20 km/h so the driver does not need to apply brakes and risk locking them. This system reads the road conditions and automatically applies the needed brake pressure to each wheel independently. This allows the driver to focus exclusively on steering and negotiating curves in the road while the system handles all the braking, especially useful in more challenging conditions where the sloped surface is slippery, rugged or uneven. When the driver touches the brake or gas pedal, HDC releases control over the descent immediately.

As you can see, Subaru X-MODE can save you but in a variety of different, and challenging scenarios. If you are looking for more information about Subaru X-MODE, then we encourage you to get in touch with a Pfaff Subaru representative, or schedule a test drive in a Subaru with X-MODE today! Click here to learn about the Pfaff Difference. 

Click here to find our contact information, schedule a test drive, or to speak with a representative.